HP 5300 Informacje Techniczne Pobierz pdf (Strona 358)

100

101

Monitoring and Analyzing Switch Operation

Interface Monitoring Features

Port receiving monitored traffic.

Monitored Ports

Figure B-20. Example of Monitored Port Listing

Configuring the Monitor Port.

Syntax:

[no] mirror-port [< port-num >]

This command assigns or removes a monitoring port, and

must be executed from the global configuration level. Removing

the monitor port disables port monitoring and resets the

monitoring parameters to their factory-default settings.

For example, to assign port A6 as the monitoring port:

HPswitch(config)# mirror-port a6

To turn off monitoring:

HPswitch(config)# no mirror-port

Selecting or Removing Monitoring Source Interfaces. After you con-

figure a monitor port you can use either the global configuration level or the

interface context level to select ports, static trunks, meshed ports, or VLANs

as monitoring sources. You can also use either level to remove monitoring

sources.

Syntax: [no] interface < monitor-list | vlan < vlan-id>> monitor

where: < monitor-list > includes port numbers, static trunk names,

and meshing, such as a4, c7, b5-b8, trk1, and mesh.

Identifies the switch elements to monitor through the currently

configured monitor port. You can monitor either one VLAN or

the port(s), static trunk(s), and any switch mesh available on

the switch.

B-26

1 2 ... 353 354 355 356 357 358 359 360 361 362 363 ... 441 442

Komentarze do niniejszej Instrukcji

Brak uwag

HP 5300 Informacje Techniczne Strona 358

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie HP 5300