HP 5300 Informacje Techniczne Pobierz pdf (Strona 395)

Troubleshooting

Debug and Syslog Messaging Operation

Debug logging requires a logging destination (Syslog server and/or a session

type), and involves the logging and debug destination commands. Actions you

can perform with Debug and Syslog operation include:

Configure the switch to send Event Log messages to one or more Syslog

servers. Included is the option to send the messages to the User log facility

(default) on the configured server(s) or to another log facility.

Note As of April 2004, the logging facility < facility-name > option (described on page

C-40) is available on these switch models:

■ Switch Series 5300XL (software release E.08.xx or greater)

■ Switch Series 4100GL (software release G.07.50 or greater)

■ Switch Series 2800

■ Switch Series 2600 and the Switch 6108 (software release H.07.30 or

greater)

For the latest feature information on HP ProCurve switches, visit the HP

ProCurve website and check the latest release notes for the switch products

you use.

■ Configure the switch to send Event Log messages to the current manage-

ment-access session (serial-connect CLI, Telnet CLI, or SSH).

■ Disable all Syslog debug logging while retaining the Syslog addresses from

the switch configuration. This allows you to configure Syslog messaging

and then disable and re-enable it as needed.

■ Display the current debug configuration. If Syslog logging is currently

active, this includes the Syslog server list.

■ Display the current Syslog server list when Syslog logging is disabled.

Debug Command Operation

As shown in figure C-13, the debug command performs two main functions:

■ Specifies the type(s) of event messaging to send to a destination.

■ Specifies the destination(s) of the selected message types.

Except as noted below, rebooting the switch returns the debug destination

and debug message types to their default settings (disabled).

Note Using the logging < dest-ip-addr > command to configure a Syslog server

address creates an exception to the above general operation. Refer to “Syslog

Operation” on page C-39.

C-35

1 2 ... 390 391 392 393 394 395 396 397 398 399 400 ... 441 442

Brak uwag

HP 5300 Informacje Techniczne Strona 395