HP Embedded Firewall Series Instrukcja Użytkownika Pobierz pdf (Strona 15)

Windows 2000 Driver Installation

This chapter explains the following tasks on a computer running Windows 2000:

• Install the network driver and NIC software using the 3Com Installation CD.

• Verify the network driver installation.

To obtain the latest version of a driver, go to:

http://www.3com.com/

Search for “3CR990B” and “drivers.” The network driver can be used in both Microsoft

and NetWare network environments.

Installing the Network Driver

1 Make sure that the NIC is installed in the computer, as described in “Installing and

Connecting the NIC” on page 3.

2 Turn on the power to the computer.

3 Insert the 3Com Installation CD in the CD-ROM drive.

If the main menu appears, click Exit.

Windows detects the NIC. The Found New Hardware Wizard starts.

4 Click Next.

The Install Hardware Device Drivers screen appears.

5 Make sure Search for a suitable driver for my device (recommended) is selected, and

then click Next.

The Locate Driver Files screen appears.

6 Make sure CD-ROM drives is selected, and then click Next.

The system detects the NIC. The Driver Files Search Results screen appears.

7 Click Next.

The Completing the Found New Hardware Wizard screen appears with the name of

the installed NIC.

8 Click Finish.

The driver is installed.

Verifying the Network Driver Installation

To verify successful NIC installation:

1 Right-click My Network Places and select Properties from the menu.

2 Check connections in the Network and Dial-up Connections window.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 85 86

Brak uwag

HP Embedded Firewall Series Instrukcja Użytkownika Strona 15