HP Embedded Firewall Series Instrukcja Użytkownika Pobierz pdf (Strona 69)

Running the Network Test

Run the Network Test to check the NIC connectivity to the network. To successfully pass

the Network Connectivity test, at least one of the following conditions must be met:

• A Windows client running on the same network. This client must have a successfully

installed Windows diagnostics program that is currently not running.

• A NetWare server running on the same network.

• A DHCP server running on the same network.

• A DNS server running on the same network with TCP/IP properties configured for the

DNS server.

To run the Network test:

1 On the Diagnostics screen, click Run Network Test.

The Network Connectivity Test screen appears.

2 Click Start.

If the test passes, the NIC connection to the network is functioning correctly.

3 Click Close.

If the test fails, make sure that the:

• NIC is properly connected to the network cable.

• Hub or switch to which the NIC is connected is powered on.

• Cable complies with the proper length and specifications for your network.

Running the NIC Test

Run the NIC Test to check the physical components, connectors, and circuitry on the NIC.

1 On the Diagnostics screen, click Run NIC Test.

The NIC Test screen appears.

2 Click Perform NIC Test.

While the test is running, a progress bar indicates test progress.

• If the test passes, the NIC is functioning correctly.

• If the test fails, a message indicates the error type. Click Help in the error message

screen to obtain more information.

3 Click Close.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 85 86

Brak uwag

HP Embedded Firewall Series Instrukcja Użytkownika Strona 69