HP Embedded Firewall Series Instrukcja Użytkownika Pobierz pdf (Strona 54)

11 Configuring the NIC

Using the 3Com DOS Configuration Program

This section describes NIC configuration for computers running DOS or NetWare.

To run the DOS diagnostic program:

1 Copy 3c99xcfg.exe from the 3Com Installation CD to the root directory of a DOS-

bootable diskette.

2 Boot to DOS using the DOS-bootable diskette.

3 Enter the following at the DOS prompt:

a:\3c99xcfg.exe

where a:\ is the drive containing the DOS-bootable diskette.

If multiple NICs are installed in the computer, select Select NIC on the first screen to

display a list of installed NICs. Use the arrow keys to select the NIC that you want to

configure and press Enter.

4 Use the arrow keys to scroll the list and make a selection. Press Enter.

5 Continue this procedure for other options. For more information on a specific option,

select the option and press F1.

NOTE: On the Configuration screen, when you choose the Auto Select setting for

Media Type, the setting for Duplex is automatically changed to Auto Select.

Selecting Auto Select for Duplex automatically changes the Media Type setting to

Auto Select.

NOTE: Note that any configuration change you make through the Windows 2003

or Windows 2000 Advanced tab overrides the same configuration setting made

through the 3Com NIC (Windows) Diagnostics program or the 3Com DOS

Diagnostic program.

NOTE: Press Esc to return to a previous screen. If a secondary window is open,

press Esc to close the window.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 85 86

Brak uwag

HP Embedded Firewall Series Instrukcja Użytkownika Strona 54