HP Integrity NonStop H-Series Podręcznik Użytkownika Pobierz pdf (Strona 38)

HP NonStop Shadowbase Command Definitions

Monitor Command Descriptions

HP NonStop Shadowbase Command Reference Manual—785421-002

RUN [ ! ]

Means ignore any configuration errors.

SET AUD Command

The SET AUD command configures AUDMON. Enter this command

before issuing a START AUD command.

In each description, there is a version box. This box contains information,

as in the samples below.

Initial Changed

Version Version Values Default Minimum Maximum Alter

2.000 2.603 900 0 disable/1 32767 Yes

Initial Changed

Version Version Values Default Value Specifications Alter

2.700 None Valid CPU number Yes

To know if your version of HP Shadowbase can use the parameter, the

first column titled ‘Initial Version’, is for when the parameter was first

introduced. The next column is for if and when the parameter was last

changed. If the parameter has a last changed version then the values in

the columns following, are as of that version. The next column provides

the default value. Next is provided, either the minimum to maximum

values, or the listed value specifications. The value in the last column,

titled ‘Alter’, is set to ‘Yes’ for those parameters that can be altered while

AUDMON is running. If the value under ‘Alter’ is ‘No’ then these

parameters cannot be altered once AUDMON is running.

The syntax is:

SET [ AUD ] { aud_parameter } [ , { aud_parameter } ] ...

aud_parameter options are described below:

ADTWARNRATE seconds

Initial Changed

Version Version Values Default Minimum Maximum Alter

2.000 2.603 900 0 disable/1 32767 Yes

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 345 346

Brak uwag

HP Integrity NonStop H-Series Podręcznik Użytkownika Strona 38