HP Integrity NonStop H-Series Podręcznik Użytkownika Pobierz pdf (Strona 39)

HP NonStop Shadowbase Command Definitions

Monitor Command Descriptions

HP NonStop Shadowbase Command Reference Manual—785421-002

Is the rate, in seconds, at which warning messages are sent to EMS.

These messages warn that a Collector is falling behind in audit reading

based upon ADTWARNTDIFF. The default is 900 seconds (15 minutes);

warnings are enabled. The minimum allowable value is 1 second.

However, 0 can be entered to disable warnings.

Note: Use caution in reducing this parameter. Significant system resources are

required for the processing associated with this parameter. Setting it too

low could also negatively impact HP Shadowbase throughput.

ADTWARNTDIFF seconds

Initial Changed

Version Version Values Default Minimum Maximum Alter

2.000 2.603 900 0 disable/1 32767 Yes

Is the time differential, between last audit trail update and the time

associated with a Collector's current audit trail reading position, at which

warnings will start to be generated to indicate that the Collector is falling

behind. The default is 900 seconds (15 minutes). The minimum allowable

value is 1 second. However, 0 can be entered to disable warnings.

Note: Use caution in reducing this parameter. Significant system

resources are required for the processing associated with this

parameter. Setting it too low could also negatively impact HP

Shadowbase throughput.

ALLOWUSERID { username }

{ (username [,username] …) }

Initial Changed Default

Version Version Value Value Specification Alter

5.001 none NonStop user id No

Specifies one or more NonStop users or user groups that are allowed to

issue commands controlling HP Shadowbase in addition to

SUPER.SUPER and the user that issued the START AUD command. The

username can either specify a single user in the format GROUP.USER, or

it can specify a user group in the format GROUP.*. If a user group is

specified, all users in that group will be able to issue control commands to

HP Shadowbase. This AUD parameter is not alterable.

AUTORESTART { ON }

{ OFF }

Initial Changed

Version Version Values Default Minimum Maximum Alter

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 345 346

Brak uwag

HP Integrity NonStop H-Series Podręcznik Użytkownika Strona 39