Hp StorageWorks 500 Modular Smart Array Instrukcja Użytkownika Pobierz pdf (Strona 96)

Display Messages

C-4 HP StorageWorks Modular Smart Array 500 System User Guide

Table C-1: Display Messages continued

Message Type Description Action

31 I2C WRITE

FAILURE <I2C device

name>

Error Read access has failed

to an internal device on

an I2C hardware bus.

Certain I2C devices are

considered critical and

will result in a failure of

the array controller while

others may result in

some loss of functionality

(such as lost display

messages).

Replace the device.

If this action does not solve

the problem, contact HP

support.

32 CHASSIS NVRAM

CONTENTS

CORRUPTED

Error NVRAM is corrupt. The

system cannot continue

to operate.

Contact HP support.

40 BEGIN

REDUNDANCY

SUPPORT

Informational The array controllers are

attempting to enter

redundant mode.

—

41 REDUNDANCY

ACTIVE ACTIVE

CONTROLLER

Informational The array controllers are

now in redundant mode

and this array controller

is active with enabled

access to the configured

volumes on the MSA500

system.

—

42 REDUNDANCY

ACTIVE STANDBY

CONTROLLER

Informational The array controllers are

now in redundant mode

and this array controller

is in standby, available

to be made active if the

current active array

controller fails, assuming

proper cabling and

installation.

—

continued

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 156 157

Komentarze do niniejszej Instrukcji

Brak uwag

Hp StorageWorks 500 Modular Smart Array Instrukcja Użytkownika Strona 96

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Przechowywanie Hp StorageWorks 500 Modular Smart Array