HP 6000 Router Series Instrukcja Instalacji Pobierz pdf (Strona 44)

44 CHAPTER 4: SOFTWARE MAINTENANCE

old password:?Enter the old password

New password:?Enter a new password

Verify: ?Acknowledge the new password

Write password to Flash...OK

Both incorrect old password and inconsistency in new password verification can

result in password modification failure. The system then exits.

Ignoring system configuration

Enter <7> in Boot main menu. The system tags the Flash with an ignore flag and

displays:

Flag set successfully.

In this case, the ex-factory configuration is used for booting and the configuration

files saved by the user are ignored.

The flag is cleaned soon after it is read during system booting.

Rebooting the system

Enter <8> in Boot main menu to reboot the system. The following information is

displayed on the terminal screen.

Rebooting...

Upgrading Program

Files Using Xmodem

Protocol

Upgrading Boot ROM

Program

Detailed procedures:

1 Connect the configuration PC as per Figure 4-1.

2 Start the router and press <Ctrl+A> in five seconds when the system prompts

"Starting…" to enter Boot sub-menu.

3 Change the baudrate of the serial port on RPU card to increase loading rate. See

Modifying serial port parameters, for more details.

The baudrate of RPU serial port is 9600bps. Skip this step if you do not want to

modify it. If you have changed the baudrate, remember to reset it to 9600bps

when file transfer is completed.

4 Enter <2> in Boot sub-menu and the system will first download program files from

the configuration PC to memory using Xmodem protocol. The system begins to

upgrade Boot ROM program if no error is found in system checks. The following

information is shown on the terminal screen:

Please Select File.

XMODEM downloading...CC

5 Select [Transfer/Send files] in HyperTerminal when the above information pops up.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 81 82

Brak uwag

HP 6000 Router Series Instrukcja Instalacji Strona 44