HP 6000 Router Series Instrukcja Instalacji Pobierz pdf (Strona 47)

Upgrading Application Program via Ethernet Port 47

3 Copy the target application files to the designated directory and configure IP

address for the PC Ethernet port.

Running TFTP Server or

FTP Server

Start TFTP server or FTP Server and set a path for the target files. For FTP Server, you

should also set username and password.

FTP Server or TFTP Server is not shipped with 3Com series routers, so you have to

buy it separately and install.

Configuring the Router

1 Start the router and press <Ctrl+B> to enter Boot main menu. See Boot Main

Menu for more details.

2 Select <4> in Boot main menu to enter Ethernet port sub-menu.

3 Select <3> in Ethernet port sub-menu to set Ethernet port parameters.

■ For TFTP upgrade mode, you should set the following parameters:

■ file name: The file name to be downloaded inet on ethernet (e)

■ The IP address for the downloading port in the router is user-defined and

should not be in conflict with other device addresses in the network. host

inet (h)

■ The IP address of TFTP Server

■ flags (f): Enter 0x80 for TFTP mode.

■ For FTP upgrade mode, you should set the following parameters:

■ file name: The file name to be downloaded

■ inet on ethernet (e): The IP address for the downloading port in the router,

is user-defined and should not be in conflict with other device addresses in

the network.

■ host inet (h): The IP address of FTP Server

■ user (u): username, which should be consistent with that at FTP Server.

■ ftp password (pw) (blank = use rsh); password, which should be consistent

with that at FTP Server.

■ flags (f): Enter 0x0 for TFTP mode.

FTP usemame and password in Boot main menu should be consistent with those

at FTP Server.

4 Select <1> in Ethernet port sub-menu to download application files and start

them. Or Select <2> in Ethernet port sub-menu to download application files to

Flash. The following information is shown on the terminal screen:

Attached TCP/IP interface to wancom0.

Loading... done

writing Flash................................Done

5 Select <4> in Ethernet port sub-menu to return to Boot main menu. Select <1> in

it to run the new files. Till now the upgrading ends.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 81 82

Brak uwag

HP 6000 Router Series Instrukcja Instalacji Strona 47