Hp StorageWorks DAT 72x10 Tape Autoloader Instrukcja Użytkownika Pobierz pdf (Strona 24)

Figure 8 Installing the rails into the rack (examp le shows an HP Rack10000 Series)

Description

Number

Usethe screws (x8) from thescrew pack foryourracktype.

To install the autoloader on the rails and into the rack:

1. Locate the captive screws on the front mounting brackets of the autoloader (see Figure 9).

2. Slide the back edge of the autoloader onto the rails. Push the autoloader back until the front bezel

ﬂush with the front rack columns.

NOTE:

Thereshouldbenocablesconnectedtotheautoloaderatthispoint.

3. From the front of the autoloader, secure the front mounting brackets to the rack using a #2 Phillips

screw d river to tighten the captive screws on each side of the autoloader, as shown in Figure 9.

Installing the autoloader

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 61 62

Brak uwag

Hp StorageWorks DAT 72x10 Tape Autoloader Instrukcja Użytkownika Strona 24