Hp StorageWorks DAT 72x10 Tape Autoloader Instrukcja Użytkownika Pobierz pdf (Strona 41)

1. From the H om e screen, press Previous or Next until the screen displays Configuration.

Press Enter to select.

2. Press Previous or Next until the screen displays Autoloader Behavior.Press Enter to select.

3. The display shows Autoloader Mode on the ﬁrst line with the current status on the second line

(normally Automatic, which is the default status). Press Enter if you wish to change this.

4. The screen displays Set Autoloader Mode .Press Previous or Next until the second line

displays the required mode: Automatic, Sequential,or Random.Press Enter to select the

autoloader mod e.

If you have selected Sequential mode, you may also wish to set Autoload and Loop options.

NOTE:

HP strongly recommends that you use backup software that is robotics-aware, then you will

not

need to use Sequential mode.

5. Press Previous or Next until the screen displays either Autoload Mode Disabled or

Autoload Mode

Enabled. To change the autoload mode, press Enter.

6. The screen will display either Disable Autoload Mode? or Enable Autoload Mode? Press

Previous or Next

to toggle bet ween enabled and disabled screens. Press Enter to select the

required mode.

7. Press Previous or Next until the screen displays either Loop Mode Disabled or Loop Mode

Enabled. To change loop mode, press Enter. The screen will display either Enable Loop

Mode? or Disable Loop Mode?

Press Enter to select the loop mode.

Setting the autoloader date a nd time

This option sets the d ate and time used by the autoloader to record events.

To set the date a n d time, do the following:

1. From the H om e screen, press Previous or Next until the screen displays Configuration.

Press Enter to select.

2. Press Previous or Next until the screen displays Set Autoloader Date/Time .Press Enter

select.

3. Press Previous or Next until the screen displays (example) Set Yr/Month/Day 2005 / 07

/21. The second line on the display will display the current date with the ﬁrst number ﬂashing.

4. Press Previous or Next until the ﬂashing number reads correctly. Press Enter. This will move the

cursor to the next character.

5. Repeat Step 4 until all numbers in the date are correct. Press Enter.

6. The screen displays (examp le) Set Hours / Mins 16: 52 with the ﬁrst number ﬂashing.

NOTE:

The autoloader uses a 24-hour clock. For example 1 :00 p.m. is displayed as 13:00.

7. Press Previous or Next until the ﬂashing number reads c orrectly. Press Enter to m ove to the next

number. Repeat this step until all numbers in the time are correct. Press Enter.

Opera

tions

The Op

erations menu provides access to the following autoloader operation options:

• Unlocking, removing and replacing magazines, page 42

• Cleaning the tape drive,page42

DAT 72x10 1U Tape Autoloader

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 61 62

Komentarze do niniejszej Instrukcji

Brak uwag

Hp StorageWorks DAT 72x10 Tape Autoloader Instrukcja Użytkownika Strona 41

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Przechowywanie Hp StorageWorks DAT 72x10 Tape Autoloader