HP D2D2502i Podręcznik Użytkownika Pobierz pdf (Strona 152)

vtl modify library

Description of Command Function

Modifies an existing library.

Command Syntax (multi-node products)

vtl modify library SETX LIBX [name <string>] [interface {iSCSI|FC}]

[LibPort <num> [,<num>]] [LibEmulation

{Generic|MSL2X24|MSL4X48|MSL8X96|EML|ESL}] [DriveEmulation

{LTO2|LTO3|LTO4|LTO5|UltriumVT}] [DrivePort <number>[,<number>]]

[NoOfSlots <number>] [NoOfDrives <number>] [Port <number> [,<number>]]

Command Syntax (single-node products)

vtl modify library SETX LIBX [name <string>] [interface {iSCSI|FC}]

[LibPort <num> [,<num>]] [LibEmulation

{Generic|MSL2X24|MSL4X48|MSL8X96|EML|ESL}] [DriveEmulation

{LTO2|LTO3|LTO4|LTO5|UltriumVT}] [DrivePort <number>[,<number>]]

[NoOfSlots <number>] [NoOfDrives <number>] [Port <number> [,<number>]]

[iSCSIname <string>] [iAuthenticationEnable {yes|no}] [iUsername

<string>] [isecret <string>] [tAuthenticationEnable {yes|no}] [tUsername

<string>] [tsecret <string>] [wwpn <wwpn>] [wwnn <wwnn>]

Command Authority

Administrator

Command Object Requirements

• SET

– This required object defines the service set containing the virtual tape library to be

modified. X is the numeric index of the service set.

• LIB

– This required object is the virtual tape library to be modified. X is the numeric index of

the library.

NOTE: This is the library object name, not the user-defined name of the library. You can

find the LIBX object name for a library using the “vtl show library list” (page 170) command.

Command Parameter Requirements

• name – This optional parameter is used to modify the human readable name for the virtual

tape library. The value is a text string with a maximum of 30 characters. If not defined, the

current value remains unchanged.

• Interface – This optional parameter defines the physical interface to be used by the virtual

library. The value is either FC or iSCSI. If the parameter is not defined, the current value

remains unchanged. If the interface is changed, all drives and the library port are modified

to this new interface and any parameter values associated with the old interface become

undefined.

• LibPort – This optional parameter allows different port ranges to be assigned to the robotic

arm and virtual drives and is only valid if the library interface is Fibre Channel. It defines the

physical Fibre Channel ports via which robotic arm commands to the virtual library will be

transmitted. The value is a number, or a set of numbers separated by commas, that correspond

to the ports as defined by the vtl show ports command. If not defined, the current value

remains unchanged unless the interface has been changed to Fibre Channel in this command,

in which case the value is the set of all Fibre Channel ports defined by the vtl show ports

command. A value of zero indicates that no port should be assigned to the Fibre Channel

interface.

• LibEmulation – This optional parameter defines the type of physical library to be emulated by

the virtual tape library. The values are defined in the Command Syntax. If not defined, the

152 Alphabetical List of Commands and Details

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 177 178

Komentarze do niniejszej Instrukcji

Brak uwag

HP D2D2502i Podręcznik Użytkownika Strona 152

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Bramy / kontrolery HP D2D2502i