HP D2D2502i Podręcznik Użytkownika Pobierz pdf (Strona 154)

• tAuthenticationEnable – single-node only. This optional parameter determines if the CHAP

(challenge handshake authentication protocol) target log on is enabled. The value for this

parameter is either yes or no. If not defined, the current value remains unchanged.

• tUserName – single-node only. This optional parameter defines the target user name for the

CHAP (challenge handshake authentication protocol) and is only valid if the interface is iSCSI.

The value is a text string with a maximum of 224 characters. If not defined, the current value

remains unchanged.

• tSecret – single-node only. This parameter defines the target secret for the CHAP (challenge

handshake authentication protocol) and is only valid if the interface is iSCSI. If the value of

this parameter is yes and the value for the iAuthenticationEnable is no, an error is generated.

If not defined, the current value remains unchanged.

• WWPN – single-node only. This optional parameter defines the worldwide port name if the

virtual drive uses Fibre Channel ports. If the virtual drive interface is not Fibre Channel, defining

this will generate an error. The value must be a worldwide port name. If more than one library

port exists, the parameter consists of a list of worldwide port names separated by commas,

The worldwide port names are assigned to the library ports starting with the first worldwide

port name in the list being assigned to the lowest valued library port number. The next

worldwide port name being assigned to the next lowest valued library port number and

continuing for all worldwide port names in the list. If not defined, the current value remains

unchanged.

• WWNN – single-node only. This optional parameter defines the worldwide node name of

the drive if the virtual drive uses Fibre Channel ports. If the virtual drive does not use Fibre

Channel, defining this will generate an error. The value must be a valid worldwide name. If

not defined, the current value remains unchanged.

Requirements for Command Execution

• The command entry must conform to the command syntax.

• All object values must be valid; see the object descriptions for details.

• All parameter values must be valid; see the parameter descriptions for details.

Successful Command Output

Upon successful completion of the command, the following is displayed:

Command Successful

Command Operation during Abnormal Conditions

If any of the command execution requirements fail, command execution terminates. The library is

not modified and one of these error messages is displayed:

• Command Failed – Did not conform to the correct command syntax “vtl

modify library SETX LIBX [name <string>] [interface { iSCSI | FC }]

[LibPort <num> [,<num>]] [LibEmulation { Generic | MSL2X24 | MSL4X48

| MSL8X96 | EML | ESL }] [DriveEmulation { LTO2 | LTO3 | LTO4 | LTO5

| UltriumVT }] [DrivePort <number>[,<number>]] [NoOfSlots <number>]

[NoOfDrives <number>] [Port <number> [,<number>]] [iSCSIname <string>

] [iAuthenticationEnable {yes | no}] [iUsername <string>] [iSecret

<string>] [tAuthenticationEnable {yes | no}] [tUsername <string>]

[tSecret <string>] [wwpn <wwpn>] [wwnn <wwnn>] [BarcodeLength { 6

| 8 }] [nonstop {yes | no}]”

• Command Failed – The entry does not conform to command syntax. The

number of double quotes (“) is odd.

• Command Failed – The service set <SETX> is invalid

• Command Failed – The service set <SETX> does not exist

154 Alphabetical List of Commands and Details

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 177 178

Komentarze do niniejszej Instrukcji

Brak uwag

HP D2D2502i Podręcznik Użytkownika Strona 154

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Bramy / kontrolery HP D2D2502i