HP D2D2502i Podręcznik Użytkownika Pobierz pdf (Strona 26)

hardware beacon

NOTE: This command applies to single-node products only.

Description of Command Function

Turns on or off the beacon for a hardware component. (The hardware component must support

the beacon feature.)

Command Syntax

hardware beacon <dev-id> {on|off}

Command Authority

Operator and Administrator

Command Object Requirements

dev-id – This required object defines the hardware component whose beacon is to be turned on

or off. The value is a string of the device identifier as listed in the hardware show status

command.

Command Parameter Requirements

on/off – This required parameter defines the state of the beacon on the hardware component.

“On” illuminates the beacon, and “off” places the beacon in a non-illuminated state.

Requirements for Command Execution

• The command entry must conform to the command syntax.

• All object values must be valid; see the object descriptions for details.

• All parameter values must be valid; see the parameter descriptions for details.

Successful Command Output

After command execution, the beacon on the selected hardware component is turned on or off

and the following is displayed:

Command Successful

Command Operation during Abnormal Conditions

If any of the command execution requirements fail, command execution terminates. The beacon

status is unchanged and one of these error messages is displayed:

• Command Failed - the command does not conform to the required syntax,

SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this

section.

• Command Failed – The hardware component does not exist

• Command Failed – The hardware component does not support the beacon

function

• Command Failed – The hardware component cannot support the beacon

feature at this time

Examples

# hardware beacon enclosure-1-1 on

Command Successful

# hardware beacon hard_disk-1-1-1 off

Command Successful

26 Alphabetical List of Commands and Details

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 177 178

Brak uwag

HP D2D2502i Podręcznik Użytkownika Strona 26