HP 7000 dl Router Series Podręcznik Użytkownika Pobierz pdf (Strona 152)

100

101

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip mroute [<group-address> | <interface>] [summary]

Use the show ip mroute command to display IP multicasting routing table information.

Syntax Description

<group-address> Optional.

IP address of a multicast group.

<interface> Optional.

Designates the display of parameters for a specific interface (in the format

type slot/port

). For example: eth 0/1.

summary Optional.

Displays a single-line summary for each entry in the IP multicast routing

table.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is sample output from this command:

>enable

#show ip mroute

IP Multicast Routing Table

Timers: Uptime/Expires

(*, 239.2.170.3), 01:03:19/00:00:00

Incoming interface: Null, RPF nbr 0.0.0.0

Outgoing interface list:

fr 1.20, Forward, 01:03:19/00:01:48

(*, 224.1.1.1), 00:00:01/00:02:58, RP 0.0.0.0, flags: DCL

Incoming interface: Null, RPF nbr 0.0.0.0

Outgoing interface list: <-- because lo 100 ifc is joined

Loopback100, Forward/Dense, 00:00:01/00:00:00

(*, 17.0.1.50), 00:00:01/00:02:58, RP 0.0.0.0, flags: DCL

Incoming interface: Null, RPF nbr 0.0.0.0

Outgoing interface list:

Loopback100, Forward/Dense, 00:00:01/00:00:00

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 940 941

Komentarze do niniejszej Instrukcji

Brak uwag

HP 7000 dl Router Series Podręcznik Użytkownika Strona 152

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking HP 7000 dl Router Series