HP 7000 dl Router Series Podręcznik Użytkownika Pobierz pdf (Strona 685)

100

101

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set

ip proxy-arp

Use the ip proxy-arp to enable proxy Address Resolution Protocol (ARP) on the interface. Use the no

form of this command to disable this feature.

Syntax Description

<address> Defines the IP address for the interface in dotted decimal notation (for example:

192.22.73.101)

<subnet mask> Specifies the subnet mask that corresponds to the listed IP address

Default Values

By default, proxy arp is enabled.

Command Modes

(config-interface)# Interface Configuration Mode required

Functional Notes

In general, the principle of proxy-arp allows a router to insert its IP address in the source IP address field of

a packet (if the packet is from a host on one of its subnetworks). This allows hosts to reach devices on

other subnetworks without implementing routing or specifying a default gateway.

If proxy-arp is enabled, the Secure Router OS will respond to all proxy-arp requests with its specified MAC

address and forward packets accordingly.

Enabling proxy-arp on an interface may introduce unnecessary ARP traffic on the network.

Usage Examples

The following enables proxy-arp on the ATM sub-interface 1.1:

(config)#interface atm 1.1

(config-atm 1.1)#ip proxy-arp

1 2 ... 680 681 682 683 684 685 686 687 688 689 690 ... 940 941

Komentarze do niniejszej Instrukcji

Brak uwag

HP 7000 dl Router Series Podręcznik Użytkownika Strona 685

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking HP 7000 dl Router Series