HP 7000 dl Router Series Podręcznik Użytkownika Pobierz pdf (Strona 469)

100

101

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

ip route-cache

Use the ip route-cache command to enable fast-cache switching on the interface. Use the no form of this

command to disable fast-cache switching and return to process switching mode.

Syntax Description

No subcommands.

Default Values

By default, fast-cache switching is enabled on all Ethernet and virtual Frame Relay sub-interfaces. IP

route-cache is enabled for all virtual PPP interfaces.

Command Modes

(config-interface)# Interface Configuration Mode required

Valid interfaces include: Ethernet, virtual Frame Relay sub-interfaces (fr 1.16),

and virtual PPP interfaces (ppp 1).

Functional Notes

Fast switching allows an IP interface to provide optimum performance when processing IP traffic.

Usage Examples

The following example enables fast switching on the Ethernet interface:

(config)#interface ethernet 0/1

(config-eth 0/1)#ip route-cache

Note

Using Network Address Translation (NAT) or the Secure Router OS firewall capabilities on

an interface requires process switching mode (using the no ip route-cache command).

1 2 ... 464 465 466 467 468 469 470 471 472 473 474 ... 940 941

Komentarze do niniejszej Instrukcji

Brak uwag

HP 7000 dl Router Series Podręcznik Użytkownika Strona 469

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking HP 7000 dl Router Series