HP 7000 dl Router Series Podręcznik Użytkownika Pobierz pdf (Strona 763)

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

keepalive <seconds>

Use the keepalive command to enable the transmission of keepalive packets on the interface and specify

the time interval in seconds between transmitted packets.

Syntax Description

<seconds> Defines the time interval (in seconds) between transmitted keepalive packets

(valid range: 0 to 32767 seconds)

Default Values

<seconds> 10 seconds

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1) and virtual PPP interfaces (ppp 1)

Functional Notes

If three keepalive packets are sent to an interface with no response, the interface is considered down. To

detect interface failures quickly, specify a smaller keepalive time.

Usage Examples

The following example specifies a keepalive time of 5 seconds on the virtual PPP interface:

(config)#interface ppp 1

(config-ppp 1)#keepalive 5

HP 7000 dl Router Series Podręcznik Użytkownika Strona 763