HP 7000 dl Router Series Podręcznik Użytkownika Pobierz pdf (Strona 869)

100

101

SROS Command Line Interface Reference Guide Loopback Interface Configuration Command Set

ip rip receive version <version>

Use the ip rip receive version command to configure the RIP version the unit accepts in all RIP packets

received on the interface.

Syntax Description

<version> Specifies the RIP version.

1 Only accept received RIP version 1 packets on the interface.

2 Only accept received RIP version 2 packets on the interface.

Default Values

By default, all interfaces implement RIP version 1 (the default value for the version command).

Command Modes

(config-interface)# Interface Configuration Mode required (applies to all physical interfaces as well as

virtual interfaces)

Functional Notes

Use the ip rip receive version to specify a RIP version that overrides the version (in the Router RIP )

configuration.

The Secure Router OS only accepts one version (either 1 or 2) on a given interface.

Usage Examples

The following example configures the loopback interface to accept only RIP version 2 packets:

(config)#interface loopback 1

(config-loop 1)#ip rip receive version 2

1 2 ... 864 865 866 867 868 869 870 871 872 873 874 ... 940 941

Komentarze do niniejszej Instrukcji

Brak uwag

HP 7000 dl Router Series Podręcznik Użytkownika Strona 869

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking HP 7000 dl Router Series