HP 7000 dl Router Series Podręcznik Użytkownika Pobierz pdf (Strona 434)

100

101

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

The following commands are common to multiple command sets and are covered in a centralized section

of this guide. For more information, refer to the sections listed below:

alias <“text”> on page 923

bind <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port> on page 924

description on page 927

do on page 928

end on page 929

exit on page 930

ping <address> on page 931

show running-config on page 933

shutdown on page 935

All other commands for this command set are described in this section in alphabetical order.

access-policy <policyname> on page 436

arp arpa on page 439

bandwidth <value> on page 440

bridge-group <group#> on page 441

crypto map <mapname> on page 442

dynamic-dns [dyndns | dyndns-custom | dyndns-static] <hostname> <username> <password> on

page 445

encapsulation 802.1q on page 447

Note

Not all Ethernet commands apply to all Ethernet types. Use the ? command to display a list

of valid commands. For example:

Router>enable

Password:

Router#config term

Router(config)#int eth 0/1

Router(config-eth 0/1)#?

access-policy - Assign access control policy for this interface

alias - A text name assigned by an SNMP NMS

arp - Set ARP commands

bandwidth - Set bandwidth informational parameter

bridge-group - Assign the current interface to a bridge group

etc....

1 2 ... 429 430 431 432 433 434 435 436 437 438 439 ... 940 941

Komentarze do niniejszej Instrukcji

Brak uwag

HP 7000 dl Router Series Podręcznik Użytkownika Strona 434

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking HP 7000 dl Router Series