HP 7000 dl Router Series Podręcznik Użytkownika Pobierz pdf (Strona 373)

100

101

SROS Command Line Interface Reference Guide IKE Policy Command Set

IKE POLICY COMMAND SET

To activate the IKE Policy , enter the crypto ike policy command at the Global Configuration Mode

prompt. For example:

Router>

enable

Router#

configure terminal

Router(config)#

crypto ike policy 1

Router(config-ike)#

The following commands are common to multiple command sets and are covered in a centralized section

of this guide. For more information, refer to the sections listed below:

bind <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port> on page 924

do on page 928

end on page 929

exit on page 930

ping <address> on page 931

show running-config on page 933

All other commands for this command set are described in this section in alphabetical order.

attribute <policynumber> on page 374

client authentication host on page 375

client authentication server list <listname> on page 377

client configuration pool <poolname> on page 378

initiate [main | aggressive] on page 379

local-id [address | asn1-dn | fqdn | user-fqdn] <ipaddress or name> on page 380

nat-traversal <version> [allow | disable | force] on page 382

peer [<ip address> | any] on page 383

respond [main | aggressive | anymode] on page 385

Note

For VPN configuration example scripts, refer to the VPN Configuration Guide located on

the ProCurve SROS Documentation CD provided with your unit.

1 2 ... 368 369 370 371 372 373 374 375 376 377 378 ... 940 941

Komentarze do niniejszej Instrukcji

Brak uwag

HP 7000 dl Router Series Podręcznik Użytkownika Strona 373

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking HP 7000 dl Router Series