HP 7000 dl Router Series Podręcznik Użytkownika Pobierz pdf (Strona 343)

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

snmp-server source-interface <interface>

Use the snmp-server source-interface command to tell the Secure Router OS where to expect SNMP

traps to originate from (interface type). All SNMP originated packets (including traps and get/set requests)

will use the designated interface’s IP address. Use the no form of this command to remove specified

Syntax Description

<interface> Specifies the physical interface that should originate SNMP traps. Enter

snmp-server trap-source ? for a complete list of valid interfaces.

Default Values

By default, there are no trap-source interfaces defined.

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example specifies that the Ethernet interface (ethernet 0/1) should be the source for all

SNMP traps and get/set requests:

(config)#snmp-server source-interface ethernet 0/1

HP 7000 dl Router Series Podręcznik Użytkownika Strona 343