HP OfficeConnect Firewall Series Instrukcja Użytkownika Strona 104

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 103
Chapter 14 Configuring IPSec VPN OfficeConnect Gigabit VPN Firewall User’s Manual
90
Figure 14.5. Intranet VPN Policy Configuration on ISR1
Step 1: Configure VPN connection rules
Refer to the section 14.2 Establish VPN Connection Using Automatic Keying to
configure VPN policies on ISR1 using automatic keying.
Step 2: Configure Firewall rules
1. Configure outbound Firewall rule to allow packets from
192.168.1.0/255.255.255.0 to 192.168.2.0/255.255.255.0 without
any NAT
2. Configure inbound Firewall rule to allow packets from
192.168.2.0/255.255.255.0 to 192.168.1.0/255.255.255.0 without
any NAT.
Table 14.2 and Table 14.3 provide the parameters to be configured for the
outbound and inbound Firewall rule fields. For a general description on
configuring any inbound/outbound Firewall rule, please refer to sections 11.3 and
11.4.
Table 14.2. Outbound Un-translated Firewall Rule for VPN Packets on ISR1
Field
Value
Source IP
Type
Subnet
Address
192.168.1.0
Mask
255.255.255.0
Destination IP
Type
Subnet
Address
192.168.2.0
Mask
255.255.255.0
NAT
None
Action
Allow
Note: The outbound Un-translated Firewall rule has to be added the existing rule
ID 1001.
Table 14.3. Inbound Un-translated Firewall Rule for VPN Packets on ISR1
Field
Value
Source IP
Type
Subnet
Address
192.168.2.0
Mask
255.255.255.0
Przeglądanie stron 103
1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 155 156

Komentarze do niniejszej Instrukcji

Brak uwag