HP OfficeConnect Firewall Series Instrukcja Użytkownika Pobierz pdf (Strona 25)

OfficeConnect Gigabit VPN Firewall User’s Manual Chapter 3. Quick Start Guide

WARNING

Mechanical Loading - Mounting of the equipment in the rack

should be such that a hazardous condition is not achieved due to

uneven mechanical loading.

WARNING

Circuit Overloading - Consideration should be given to the

connection of the equipment to the supply circuit and the effect

that overloading of the circuits might have on overcurrent

protection and supply wiring. Appropriate consideration of

equipment nameplate ratings should be used when addressing

this concern.

WARNING

Reliable Earthing - Reliable earthing of rack-mounted equipment

should be maintained. Particular attention should be given to

supply connections other than direct connections to the branch

circuit (e.g. use of power strips).

Follow these instructions to install OfficeConnect Gigabit VPN Firewall to your

19-inch rack:

1. Place the unit the right way up on a hard, flat surface with the front

facing towards you.

2. Locate a mounting bracket over the mounting holes on one side of

the unit, as shown in Figure 3.2 below.

3. Insert the two screws and fully tighten with a suitable screwdriver.

4. Repeat the two previous steps for the other side of the unit.

5. Insert the unit into the 19-inch rack and secure with suitable screws

(not provided).

6. Reconnect all cables.

Figure 3.2 Assembling the rack mount kit

Figure 3.3 Rack Mounting

3.3 Part 3 — Configuring Your Computers

Part 3 of the Quick Start Guide provides instructions for configuring the Internet

settings on your computers to work with the OfficeConnect Gigabit VPN Firewall.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 155 156

Brak uwag

HP OfficeConnect Firewall Series Instrukcja Użytkownika Strona 25