HP OfficeConnect Firewall Series Instrukcja Użytkownika Pobierz pdf (Strona 28)

Chapter 3. Quick Start Guide OfficeConnect Gigabit VPN Firewall User’s Manual

After all files are installed, a window displays to inform you that a

TCP/IP service called DHCP can be set up to dynamically assign IP

information.

11. Click <Yes> button to continue, and then click <OK> button if

prompted to restart your computer.

Next, configure the PCs to accept IP addresses assigned by the

OfficeConnect Gigabit VPN Firewall:

12. Open the Control Panel window, and then double-click the Network

icon.

13. In the Network dialog box, click the Protocols tab.

14. In the Protocols tab, select TCP/IP, and then click <Properties>

button.

15. In the Microsoft TCP/IP Properties dialog box, click the radio button

labeled Obtain an IP address from a DHCP server.

16. Click <OK> button twice to confirm and save your changes, and then

close the Control Panel.

3.3.6 Assigning static IP addresses to your PCs

In some cases, you may want to assign IP addresses to some or all of your PCs

directly (often called ―statically‖), rather than allowing the OfficeConnect Gigabit

VPN Firewall to assign them. This option may be desirable (but not required) if:

 You have obtained one or more public IP addresses that you want to

always associate with specific computers (for example, if you are using a

computer as a public web server).

 You maintain different subnets on your LAN.

However, during the first time configuration of your OfficeConnect Gigabit VPN

Firewall, you must assign an IP address in the 192.168.1.0 network for your PC,

say 192.168.1.2, in order to establish connection between the OfficeConnect

Gigabit VPN Firewall and your PC as the default LAN IP on OfficeConnect

Gigabit VPN Firewall is pre-configured as 192.168.1.1. Enter 255.255.255.0 for

the subnet mask and 192.168.1.1 for the default gateway. These settings may

be changed later to reflect your true network environment.

On each PC to which you want to assign static information, follow the

instructions on pages 12 through 13 relating only to checking for and/or installing

the IP protocol. Once it is installed, continue to follow the instructions for

displaying each of the Internet Protocol (TCP/IP) properties. Instead of enabling

dynamic assignment of the IP addresses for the computer, DNS server, and

default gateway, click the radio buttons that enable you to enter the information

manually.

Note

Your PCs must have IP addresses that place them in the same

subnet as the OfficeConnect Gigabit VPN Firewall’s LAN port. If you

manually assign IP information to all your LAN PCs, you can follow

the instructions in Chapter 5 to change the LAN port IP address

accordingly.

3.4 Part 4 — Quick Configuration of the

OfficeConnect Gigabit VPN Firewall

In Part 4, you log into the Configuration Manager on the OfficeConnect Gigabit

VPN Firewall and configure basic settings for your Internet connection. Your ISP

should provide you with the necessary information to complete this step. Note

the intent here is to quickly get the OfficeConnect Gigabit VPN Firewall up and

running, instructions are concise. You may refer to corresponding chapters for

more details.

3.4.1 Setting Up the OfficeConnect Gigabit VPN Firewall

Follow these instructions to setup the OfficeConnect Gigabit VPN Firewall:

1. Before accessing the Configuration Manager in the OfficeConnect

Gigabit VPN Firewall, make sure that the HTTP proxy setting is

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 155 156

Komentarze do niniejszej Instrukcji

Brak uwag

HP OfficeConnect Firewall Series Instrukcja Użytkownika Strona 28

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie HP OfficeConnect Firewall Series