HP OfficeConnect Firewall Series Instrukcja Użytkownika Pobierz pdf (Strona 54)

Chapter 8. Configuring WAN Settings OfficeConnect VPN Firewall User’s Manual

Setting

Description

Dial On Demand

Enter the inactivity timeout period at which you want to

disconnect the Internet connection when there is no

traffic. The minimum value of inactivity timeout is 30

seconds. RIP and SNTP services may interfere with this

function if there are activities from these two services.

Make sure that the update interval setting of the system

date and time (in the System Management / Date/Time

Setup configuration page – see 17.5 Setup Date and

Time for details) is greater than the inactivity timeout

value.

Unnumbered

If your ISP assigned a block of IP addresses, you would

select ―Enable‖ radio button to give your PPPoE interface

an IP address from the same range assigned to your

LAN. Otherwise, select ―Disable‖.

8.2.2 Configuring PPPoE for WAN

Follow the instructions below to configure PPPoE settings:

1. Please make the ―Login Required‖ checkbox checked as shown in

Figure 8.1

2. If you are connecting to the Internet using PPPoE, you probably only

have to enter User Name and Password in the PPPoE Configuration

page as shown in Figure 8.1 unless you want to use your preferred

DNS servers.

3. (Optional) Enter AC name in the space provided if required by your

ISP. Otherwise, please leave this field blank.

4. (Optional) Enter Service name in the space provided if required by

your ISP. Otherwise, please leave this field blank.

5. (Optional) If you like to use DNS setting provided by your ISP, please

select ―Get Automatically from ISP‖ radio button. Otherwise, select

―Use These DNS Servers‖ radio button and enter IP addresses for

the primary and secondary DNS servers.

6. Choose a connection option and enter appropriate setting if desired.

The default setting is ―Disable‖.

7. Click to save the PPPoE settings when you are done

with the configuration. You’ll see a summary of the WAN

configuration at the bottom half of the configuration page. Note that if

the default gateway address is not shown immediately, click on the

WAN menu to open the WAN configuration page again.

8.3 PPTP

8.3.1 WAN PPTP Configuration Parameters

Table 8.2 WAN PPTP Configuration Parameters

Setting

Description

User Name and

Password

Enter the username and password you use to log into

your ISP. (Note: this is different from the information you

used to log into Configuration Manager.)

Service Name

If your ISP requires Service Name, please enter the valid

Service name into this field. Leave this field blank if it is

not necessary.

PPTP Server IP

Address

IP Address of the PPTP server.

Interface IP

Address

IP Address assigned by your ISP to make the connection

with the PPTP server.

8.3.2 Configuring PPTP for WAN

Follow the instructions below to configure PPPoE settings:

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 155 156

Komentarze do niniejszej Instrukcji

Brak uwag

HP OfficeConnect Firewall Series Instrukcja Użytkownika Strona 54

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie HP OfficeConnect Firewall Series