HP OfficeConnect Firewall Series Instrukcja Użytkownika Pobierz pdf (Strona 70)

Chapter 14 Configuring IPSec VPN OfficeConnect Gigabit VPN Firewall User’s Manual

Figure 11.3 ACL Rule List Table

You can configure ACL rules for LAN/WAN, DMZ/WAN DMZ/LAN and Self-

Access traffic by clicking tab button on the top of the ACL Rule List Table (See

Figure 11.4).

Figure 11.4 Tab Buttons for Different Traffic Types

Figure 11.5. Inbound ACL Configuration Example

11.3.3 Add Inbound ACL Rules

To add an inbound ACL rule, follow the instructions below:

1. Click button in the inbound access control list table to

add a new inbound ACL rule.

2. Make changes to any or all of the following fields: source/destination

IP, Service and Schedule. Please see Table 11.1 for explanation of

these fields.

3. Set desired action (Allow or Deny) from the ―Action‖ drop-down list.

4. If you want to use NAT in this rule, select ―IP Address‖ and specify IP

address for the reverse NAPT (See 11.2.4 for detailed explanation).

5. If you want to manually assign the port number, select ―Assign‖ from

the drop-down list and specify port number in the ―Port‖ field.

Otherwise, select ―Auto‖ to assign the destination port automatically.

6. Click on the button to create the new ACL rule. The

new ACL rule will then be displayed in the inbound access control list

table at the bottom half of the ACL Configuration page.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 155 156

Brak uwag

HP OfficeConnect Firewall Series Instrukcja Użytkownika Strona 70