
Chapter 3. Quick Start Guide OfficeConnect Gigabit VPN Firewall User’s Manual
10
3.1.4 Step 4. Turn on the OfficeConnect Gigabit VPN
Firewall, the ADSL or cable modem and power up
your computers.
Press the Power switch on the rear panel of the OfficeConnect Gigabit VPN
Firewall to the ON position. Turn on your ADSL or cable modem. Turn on and
boot up your computer(s) and any LAN devices such as hubs or switches.
Figure 3.1 Overview of Hardware Connections
You should verify that the LEDs are illuminated as indicated in Table 3.1.
Table 3.1 LED Indicators
Solid green to indicate that the device is turned on. If this light
is not on, check if the power adapter is attached to the
OfficeConnect Gigabit VPN Firewall and if it is plugged into a
Solid green to indicate that the device can communicate with
your LAN or flashing when the device is sending or receiving
data from your LAN computer.
Solid green to indicate that the device has successfully
established a connection with your ISP or flashing when the
device is sending or receiving data from the Internet.
If the LEDs illuminate as expected, the OfficeConnect Gigabit VPN Firewall
hardware is working properly.
3.2 Part 2 — Rack Mounting Instructions
The OfficeConnect Gigabit VPN Firewall is 1U high and will fit a 19-inch rack if
the rack mount kit is properly installed.
Elevated Operating Ambient - If installed in a closed or multi-
unit rack assembly, the operating ambient temperature of the
rack environment may be greater than room ambient. Therefore,
consideration should be given to installing the equipment in an
environment compatible with the maximum ambient temperature
(Tma) specified by the manufacturer.
Reduced Air Flow - Installation of the equipment in a rack
should be such that the amount of air flow required for safe
operation of the equipment is not compromised.
Komentarze do niniejszej Instrukcji