HP OfficeConnect Firewall Series Instrukcja Użytkownika Strona 109

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 108
OfficeConnect VPN Firewall User’s Manual Chapter 15. Configuring L2TP Server
95
15 Configuring L2TP Server
15.1 Introduction
The OfficeConnect Gigabit VPN Firewall can terminate L2TP-over-IPsec
connections from incoming Microsoft Windows 2000 and Windows XP clients.
You can use Layer 2 Tunneling Protocol (L2TP) to create VPN over public
networks such as the Internet. L2TP provides interoperability between different
VPN vendors that protocols such as PPTP and L2F do not, although L2TP
combines the best of both protocols and is an extension of them. L2TP is
supported on Microsoft Windows 2000 Operating System. L2TP supports
several of the authentication options supported by PPP, including Password
Authentication Protocol (PAP), Challenge Handshake Authentication Protocol
(CHAP), and Microsoft Challenge Handshake Authentication Protocol (MS-
CHAP). You can use L2TP to authenticate the endpoints of a VPN tunnel to
provide additional security, and you can implement it with IPsec to provide a
secure, encrypted VPN solution.
The chapter contains instructions for configuring L2TP server and also provides
an example for configuring L2TP over IPSec.
15.2 L2TP Server Configuration Parameters
Table 14.1describes all the L2TP Server configuration parameters.
Table 15.1. L2TP Server Configuration Parameters
Options
Description
General Settings
Options
Description
Enable L2TP
Click on Yes radio button if you want to enable the
L2TP server.
Start IP
Enter the starting IP address of L2TP address pool in
the specified field.
End IP
Enter the ending IP address of L2TP address poll in
the specified field.
Primary DNS
Server
Enter the first DNS server address in the specified
field.
Secondary DNS
Server
If you want to specify the secondary DNS address,
enter the address in the specified field.
Primary WINS
Server
Enter the first WINS server address in the specified
field.
Secondary WINS
Server
If you want to specify the secondary WINS server
address, enter the address in the specified field.
User Group
Specifies a user group from the drop-down list. Make
sure the user group has been configured properly.
Przeglądanie stron 108
1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 155 156

Komentarze do niniejszej Instrukcji

Brak uwag