
OfficeConnect VPN Firewall User’s Manual Chapter 16. Configuring PPTP Server
97
16 Configuring PPTP Server
16.1 Introduction
PPTP (Point-to-Point Tunnelling Protocol) is an encrypted VPN protocol like
IPSec. It is not as secure as IPSec but is easy to administrate. PPTP does not
support gateway to gateway connections and is only suitable for connecting
remote users.
16.2 PPTP Server Configuration Parameters
Table 16.1 describes all the PPTP Server configuration parameters.
Table 16.1. PPTP Server Configuration Parameters
Click on Yes radio button if you want to enable the
PPTP server.
Enter the starting IP address of PPTP address pool in
the specified field.
Enter the ending IP address of PPTP address poll in
the specified field.
Enter the first DNS server address in the specified
field.
If you want to specify the secondary DNS address,
enter the address in the specified field.
Enter the first WINS server address in the specified
field.
If you want to specify the secondary WINS server
address, enter the address in the specified field.
Specifies a user group from the drop-down list. Make
sure the user group has been configured properly.
Figure 16.1. PPTP Server Configuration Page
Komentarze do niniejszej Instrukcji