HP OfficeConnect Firewall Series Instrukcja Użytkownika Strona 106

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 105
Chapter 14 Configuring IPSec VPN OfficeConnect Gigabit VPN Firewall User’s Manual
92
configuring any inbound/outbound Firewall rule, please refer to sections 11.3 and
11.4.
Table 14.4. Outbound Un-translated Firewall Rule for VPN Packets on ISR1
Field
Value
Source IP
Type
Subnet
Address
192.168.2.0
Mask
255.255.255.0
Destination IP
Type
Subnet
Address
192.168.1.0
Mask
255.255.255.0
NAT
None
Action
Allow
Note: The outbound Un-translated Firewall rule has to be added the existing rule
ID 1001.
Table 14.5. Inbound Un-translated Firewall Rule for VPN Packets on ISR1
Field
Value
Source IP
Type
Subnet
Address
192.168.1.0
Mask
255.255.255.0
Destination IP
Type
Subnet
Address
192.168.2.0
Field
Value
Mask
255.255.255.0
NAT
None
Action
Allow
VPN
Enable
14.4.1.3 Establish Tunnel and Verify
Ping continuously from a host in the LAN behind ISR1 to a host in the LAN
behind ISR2. The first few pings might fail. After a few seconds, the host in
the LAN behind ISR1 should start getting ping response.
14.5 Managing VPN User Account
OfficeConnect Gigabit VPN Firewall provides a mechanism for user level
authentication that gives user to access VPN tunnels and send data across the
encrypted connection. You can configure the router to use the local user
database to authenticate users and control their access to the network resource.
Follow these steps to add a new user to the local user database:
1. Click on VPN > Users > Local User to enter the Local User
configuration page.
Przeglądanie stron 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 155 156

Komentarze do niniejszej Instrukcji

Brak uwag