HP OfficeConnect Firewall Series Instrukcja Użytkownika Pobierz pdf (Strona 46)

Chapter 5. Configuring LAN Settings OfficeConnect VPN Firewall User’s Manual

Figure 5.6 Port Selection

2. If the selected port is Port 3 or Port 4, you should be able to change

the mode of selected port to LAN port or DMZ port. Select the port

type from the drop-down list. Once the DMZ port is enabled, the

corresponding DMZ interface will be activated as well and you

should be able to configure the DMZ interface in the IP Setup

configuration page.

3. To enable the selected port, please keep the Enable check box

checked. Otherwise, please click on the Enable check box to disable

the selected port.

4. To change the selected port speed, please select a value from the

Speed drop-down list.

5. Click. to save the settings you made.

5.6 Viewing LAN Statistics

You can view statistics of your LAN traffic on the OfficeConnect Gigabit VPN

Firewall. You will not typically need to view this data, but you may find it helpful

when working with your ISP to diagnose network and Internet data transmission

problems.

To view LAN IP statistics, click Traffic Statistics in the Monitoring submenu and

select VLAN/LAN (eth0.1) from the interface drop down button. Figure 5.7 shows

the LAN Statistics page:

Figure 5.7 LAN Statistics Page

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 155 156

Brak uwag

HP OfficeConnect Firewall Series Instrukcja Użytkownika Strona 46