HP Web Jetadmin Software Instrukcja Użytkownika Strona 440

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 439
CAUTION: Use caution when changing the 802.1X authentication settings. You might lose the connection. If
communication with the device is lost, you might need to reset the device server to a factory-default state, and
then reinstall the device.
For most 802.1X networks, the infrastructure components, such as LAN switches, must use 802.1X protocols to
control a port's access to the network. If these ports do not allow partial or guest access, you might need to
congure the print server with the 802.1X parameters prior to connecting to the network. To congure the initial
802.1X settings before connecting to the network, you can use an isolated LAN or a direct computer connection
using a crossover cable. The supported 802.1X authentication protocols and associated conguration depend on
the print server model and rmware version.
Use the following steps to congure this option:
1. Select the supported protocols that are used for 802.1X authentication on the network.
●
PEAP (congure certicate rst): Protected Extensible Authentication Protocol (PEAP) uses digital
certicates for network server authentication and passwords for client authentication. PEAP requires
an EAP user name, EAP password, and Certicate Authority (CA) certicate. Dynamic encryption keys
are also used.
●
EAP-TLS (congure certicate rst): Extensible Authentication Protocol using Transport Layer Security
(EAP-TLS) is a mutual authentication protocol based on digital certicates for authentication of the
client and network server. EAP-TLS requires an EAP user name, HP Jetdirect certicate, and CA
certicate. Dynamic encryption keys are also used.
2. In the User name text box, enter the EAP/802.1X user name for the device (maximum of 128 characters).
The default user name is the default hostname of the print server, NPIxxxxxx, where xxxxxx is the last six
digits of the LAN hardware (MAC) address.
3. In the Password text box, enter the EAP/802.1X password for the device (maximum of 128 characters).
4. In the Conrm password text box, enter the password again.
5. In the Server ID text box, enter the server ID that identies and validates the authentication server. The
server ID is specied on the digital certicate that a trusted CA issued for the authentication server.
NOTE: If the Require Exact Match checkbox is not selected, you can specify any string for the server ID.
6. To validate the server ID that is specied in the Server ID box against the server ID that is specied in the
digital certicate issued by the CA for the authentication server, select the Require Exact Match checkbox.
7. In the On Authentication Failure section, select one of the following options:
●
Connect Anyway (802.1x Fail-over): If this option is selected and the 802.1X authentication settings
are applied to an unsecured port, the device does not lose connectivity if you do not change from an
unsecured port to a secured port on the device. The device connectivity functions without 802.1X
authentication.
●
Block Network (Secure failure): If this option is selected and the 802.1X authentication settings are
applied to an unsecured port, the device enters a communication error status if you do not change
from an unsecured port to a secured port on the device. To return the device to a ready state, change
to a secured port on the device.
8. From the Encryption strength list, select the level of encryption for the selected protocols.
Federal Information Processing Standard (FIPS) supports only the High encryption strength. To congure
the encryption strength when FIPS mode is enabled on the device, you must specify the High encryption
strength. If you specify the Low or Medium encryption strength, the conguration fails.
9. To initialize the port, select the Re-authenticate on apply checkbox. The device re-authenticates the 802.1X
settings after they are applied.
414 Chapter 6 Device Conguration Options ENWW
Przeglądanie stron 439
1 2 ... 435 436 437 438 439 440 441 442 443 444 445 ... 491 492

Komentarze do niniejszej Instrukcji

Brak uwag

Attwood Stainless Steel Straight Thru-Hulls Threaded manuales

Manuales del propietario y guías del usuario para Hardware Attwood Stainless Steel Straight Thru-Hulls Threaded.
Ofrecemos 1 manuales en pdf Attwood Stainless Steel Straight Thru-Hulls Threaded para descargar gratis por tipos de documentos: Manual de usuario






Más productos y manuales para Hardware Attwood

Modelos Tipo de documento
Stainless Steel Scupper Valves Manual de usuario   Attwood Stainless Steel Scupper Valves User Manual, 3 paginas
Scupper Valve Manual de usuario   Attwood Scupper Valve User Manual, 1 paginas
238 Series Seat Mounts Manual de usuario   Attwood 238 Series Seat Mounts User Manual, 1 paginas
Anchor Rein II Anchor Lift Manual de usuario   Attwood Anchor Rein II Anchor Lift User Manual, 2 paginas
Anchor Lift System Manual de usuario     Attwood Anchor Lift System User Manual, 4 paginas
Marine Quick Cinch Manual de usuario    Attwood Marine Quick Cinch Manuel d'utilisation, 1 paginas
Vinyl & Leather Repair Kit Manual de usuario     Attwood Vinyl & Leather Repair Kit User Manual, 2 paginas
Cargo Net Manual de usuario    Attwood Cargo Net Manuel d'utilisation, 1 paginas
Sportline Glove Boxes Manual de usuario   Attwood Sportline Glove Boxes User Manual, 1 paginas
Fold-Up Drink Holder Dual Ring Manual de usuario   Attwood Fold-Up Drink Holder Dual Ring User Manual, 1 paginas
Wide View Ski Mirror Manual de usuario   Attwood Wide View Ski Mirror User Manual, 1 paginas
Neat Cleat Manual de usuario    Attwood Neat Cleat Manuel d'utilisation, 2 paginas
Lift Ring Manual de usuario   Attwood Lift Ring User Manual, 1 paginas
Boat Cover Repair Kit Manual de usuario   Attwood Boat Cover Repair Kit User Manual, 1 paginas
Rip Guard Boat Cover Protectors Manual de usuario   Attwood Rip Guard Boat Cover Protectors User Manual, 1 paginas