HP Web Jetadmin Software Instrukcja Użytkownika Pobierz pdf (Strona 52)

r. On the Conrm page, verify that the information is correct, and then click the Apply Template button.

s. On the Results page, click the Done button.

2. Use the following steps to delete the SNMPv3 global credentials that use the MD5 and DES protocols:

a. Go to Tools > Options > Shared > Credentials > Device > SNMPv3.

b. Select the SNMPv3 credential that uses the MD5 and DES protocols from the list, and then click the

Remove button.

c. On the Conrm Delete window, click the Yes button.

d. Repeat steps b through c for each SNMPv3 credential that uses the MD5 and DES protocols.

3. Run a discovery to rediscover all of the SNMPv3-congured devices.

4. Trap forwarding that is congured to use SNMPv3 credentials with the MD5 and DES protocols does not

work after FIPS is enabled. Use one of the following procedures to update the alert subscriptions that are

congured to forward SNMP traps to a server using SNMPv3 credentials with the SHA-1 and AES-128

protocols.

NOTE: Alert subscriptions that are congured to only write alerts to the alert history log or to send email

notications when alerts occur do not need to be updated.

Update the alert subscriptions that were created by using an alert subscription template that is congured

to forward SNMP traps

a. In the Device Management navigation pane, go to Alerts > All Subscriptions.

b. At the top of the All Subscriptions pane, click the Expand all button to display the details for each alert

subscription.

c. To identify the alert subscription templates that must be updated, look for alerts that have SNMPv3

Trap Forwarding in the Notication Type column and have Linked in the Linked to Template column.

The name of the alert subscription template is shown in the Subscription Name column.

d. In the Device Management navigation pane, go to Alerts > Templates.

e. In the Alerts - Subscription Templates pane, select the alert subscription template from the list, and

then click the Edit button. The Edit Subscription Template wizard starts.

f. Click the Next button until the Specify notication settings page appears.

g. In the SNMPv3 credential section, select SHA-1 from the Authentication protocol list, and select

AES-128 from the Privacy protocol list.

h. If required, enter the new values for the user name, authentication passphrase, and privacy

passphrase.

i. Click the Next button until the Conrm page appears.

j. On the Conrm page, verify that the information is correct, and then click the Save Template button.

k. On the Results page, click the Done button.

All of the alert subscriptions that are linked to this alert subscription template are automatically

updated with the new SNMPv3 credentials.

l. Repeat steps c through k for each of the alert subscription templates.

26 Chapter 1 Install and Set Up HP Web Jetadmin ENWW

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 491 492

Brak uwag

HP Web Jetadmin Software Instrukcja Użytkownika Strona 52